EUNOIA MIXCOL PU710 2K is a high-quality, two-component adhesive based on polyurethane, fillers and additives. It is intended for gluing all types of parquet, wooden floor coverings and laminates. It can be used when gluing on absorbent and non-absorbent substrates where the moisture content does not exceed 2%. It is characterized by good adhesion and flexibility, so it can be used in systems with underfloor heating. EUNOIA MIXCOL PU710 2K is used for gluing classic parquet (length over 600 mm), single-layer parquet, two-layer parquet (length 600 – 1200 mm), three-layer parquet, mosaic and exotic parquet.
 How to use: The substrate should be firm, smooth, free of dust and grease. In the case of very porous substrates that generate dust, it is recommended to use the primer EUNOIA MIXCOL PU PRIMER. Before use, pour component B into component A, in a weight ratio of 1:7 and homogenize well. The mixing of the components is done mechanically for 3-5 minutes at 300 revolutions/min. Do not mix by hand. Do not change the mixing ratio of components A and B, as this will lead to poor quality glue. The adhesive is applied evenly to the prepared surface with a notched trowel, eg B3. Lay the floor coverings immediately on fresh glue. The processing time from mixing the components to the beginning of bonding is about 60 minutes. After finishing work, wash the tool with solvent, before the glue dries. Further processing of the parquet should be done after 24 hours.
 Safety information:
 The glue does not contain organic solvents, so the risk of evaporation is negligible.
 Component B contains isocyanates, so follow the given instructions when working.
 Operating conditions: Relative air humidity from 65% to 75%, temperature from +18°C to +25°C (do not work below +12°C). The moisture content in concrete is a maximum of 3%, while in parquet it should be between 8% and 10%.
 Consumption: 1.2 - 1.5 kg/m2, depending on the substrate
 Shelf life and storage: 12 months from the production date indicated on the packaging. Store in the original, well-closed and undamaged packaging, at a temperature of +5°C to +25°C, protected from direct sunlight.