EUNOIA topGLET finish is a one-component powder mass of the latest generation made of mineral fillers, additives and polymer-acrylic binders. It is used for leveling internal wall and ceiling surfaces made of concrete, firmly plastered wall surfaces and plasterboard panels. Leveled surfaces can be painted with all kinds of dispersion paints.
 How to use: The surface to which it is applied must be dust-free, solid, dry, free of grease and any residues of oil or old coatings. Before applying EUNOIA topGLET finish smooth surface, prime the surface with a suitable EUNOIA MIXACRIL primer. EUNOIAtopGLET finish is prepared by adding approx. 350 g of water per 1 kg of material. Mix the mixture for 3-5 minutes until complete homogenization. Leave the prepared material to stand for approx. 10 minutes, and then mix the material once more, after which it is ready for use. Apply EUNOIA topGLET finish by hand with a steel trowel, mechanically or with a roller, then iron the "butterfly" with a trowel in a layer thickness of up to 2mm. If a thicker coating is required, the smoothing mass is repeated on the previously dried layer. Total layer thickness up to 5mm. Sanding is possible after 12 hours, and after 24 hours white and tinted coatings can be applied.
 Operating temperature: The optimal operating temperature is from +10°C to +30°C. It must not be used below +5°C.
 Consumption: 0.5 - 1.5 kg/m2, depending on the condition of the wall surface.
 Shelf life and storage: 12 months from the production date indicated on the packaging. Store in the original, well-closed and undamaged packaging in a dry and ventilated room, according to the conditions prescribed for cement storage.