EUNOIA TOPKULIR is a high-quality decorative mosaic based on acrylate and grain. It adheres well to the substrate and is characterized by high strength. It is resistant to atmospheric influences and UV radiation. It is intended for the protection and decoration of external and internal mineral wall surfaces. It is the final layer when making thermal insulation facades.
 How to use: The surface must be flat, dry, clean, without loosely attached parts, dust, water-soluble salts, grease and other impurities, which can prevent good adhesion to the substrate. Dry plastered surfaces for 28 days, and the final layer of reinforcement glue for 7 days. Before application, it is mandatory to prime the surface. For newly plastered and insufficiently load-bearing surfaces, first of all, impregnate the walls with PENETRATE base. After drying the substrate, apply the TOPGRUND primer in the approximate shade of the finishing plaster, which prevents the appearance of shadows. TOPKULIR should be mixed before application until the first foam appears and as such it is ready for use. Avoid prolonged and intense mixing. If there is a large appearance of foam, leave the prepared mass to stand for 24 hours to release excess air, and only then apply the material.
 Operating temperature: The optimal operating temperature is from +10°C to +30°C. It must not be used below +5°C, nor in strong sun, wind, fog or rain. In optimal conditions, freshly treated surfaces should be protected from atmospheric influences for at least 24 hours.
 Consumption: 4 - 4.5 kg/m2 for a 3 mm thick layer.
 Shelf life and storage: 12 months from the production date indicated on the packaging. Store in the original, well-closed and undamaged packaging, at a temperature of +5 °C to +25 °C , protected from direct sunlight.